Spray foam insulation in Hobbs, NM - sealed, insulated rooms that stay comfortable
Hot upstairs, a drafty room over the garage or a power bill that keeps climbing? We seal the gaps and insulate in one step.
Is spray foam the right insulation for your Hobbs house?
Spray foam insulation in Hobbs, NM is foam we spray into an attic, wall or crawl space, where it expands into the gaps and becomes the layer that slows heat moving in or out of your house. We can foam one area, such as the attic, or the whole house.
Most people who call us have an upstairs that stays hot, a drafty room over the garage or a power bill that keeps climbing, and some have a shop or metal building that never holds its temperature. The price mostly turns on which foam fits the spot, how many square feet we cover and whether old insulation has to come out first, and if foam isn't the best value for your house, plain attic insulation may be. The schedule turns on whether your address needs a permit and how long the foam maker says to stay out while it cures, and your written estimate spells out all of it for your house.
How can you tell your house needs better insulation?
These are the things homeowners usually mention when they first call. None of them proves you need foam, but each one tells me where to look when I come out.
Upstairs rooms stay hot after the rest of the house cools, which usually means the attic is thin or leaky.
The room over the garage never feels right, because its floor and walls often have little insulation and many gaps.
You feel a draft near outlets, the attic hatch or can lights, where air slips through unsealed gaps.
Floors stay cold over the crawl space, which usually means little is stopping outside air underneath.
Your power bill climbs every season even though you haven't changed how you heat or cool the house.
The old insulation in your attic is flattened, stained or full of droppings, so it's no longer doing its job.
If you see wet or stained insulation or droppings, please call before anything new goes over it, because fresh material on a bad layer leaves the problem in place.
What happens when you call us about spray foam in Hobbs?
We're based in Hobbs and work in North Hobbs, Lovington, Seminole, TX and the cities around them. Every job runs the same way, and I explain each step before we begin.
Call or send a request
You call (575) 318-2651 or send the form, and we set a time for me to come out and look at the space myself.
I look over the space
I check how many inches of old insulation are up there, how old the house is and anything to fix first, such as wet material or droppings. You get a written estimate with the foam we'd use, the areas it covers, your price and the maker's waiting time before you come back in.
We do the work in order
Once any permit question is settled, our installers do the work in the order we agreed, keeping the foam full at the edges, and I check it along the way. If anything changes in the schedule, I'll call you ahead rather than leave you waiting.
We walk through it together
When the work is done, I walk through the finished job with you and point out the coverage at the edges as well as the middle. We go over the maker's waiting time once more so you know when the family and pets can come back in.
Get a written spray foam estimate for your space
Send the form and we'll reply within one business day to set a time for me to come out. The on-site estimate is free and comes with no obligation. Thank you for your time.
- Call
- (575) 318-2651
- Hours
- Mon–Sun: 6 AM–11 PM
Spray foam choices for attics and crawl spaces
Foam costs more than loose fill, and the extra money buys a layer that seals air while it insulates. If your ductwork runs through the attic, I usually recommend foam under the roof deck so the ducts sit inside the insulated space. If it doesn't, sealing the gaps around lights, pipes and the hatch and topping up with blown-in insulation, loose fill blown through a hose, usually gives you more for the money.
Spraying the underside of the roof deck makes an unvented attic, one that's closed to outside air and becomes part of the house. That kind of attic still needs a way to remove moisture, so plan for it as part of the job rather than an afterthought, and I'll go over how it would work in your house at the estimate.
Some foams need a covering over them, such as a coating or drywall, depending on the product and on code, and others don't. The foam we pick decides which, so we show you the product's details before work starts. A covering can add to the cost, so it goes on your written estimate rather than turning up as a surprise later.
Spray foam questions we hear in Hobbs
How much does spray foam insulation cost in Hobbs, NM?
Spray foam insulation, installed, usually runs about $1 to $5 per square foot across the US, going by 2026 national figures. Open-cell foam sits at the low end and closed-cell at the high end, and foaming one attic or crawl space costs far less than closed-cell over the whole house. Your written estimate gives you the figure for your own space.
How do I choose between open-cell and closed-cell spray foam?
Choose based on whether the spot also needs vapor control, because closed-cell foam, the dense kind, can slow both heat and moisture vapor, while open-cell lets vapor pass and can't do that job. Closed-cell sits at the higher price, so we go over which one each part of your house really needs at the estimate.
How long does spray foam need to cure before we can go back in the house?
Some foam makers recommend waiting 24 hours after a professional job before anyone goes back in, but the time varies by product. That's general guidance, so the maker's own re-entry time, the point when you can come back in, is the one to follow. I give it to you at the estimate so you can plan where the kids and pets will stay.
Who issues building permits in Hobbs, NM?
The City of Hobbs Building Inspections office issues residential building permits. Its list names work like alterations, remodels, re-roofs and HVAC systems but doesn't mention spray foam, so it's worth asking the city about your job. Before we start, I check with the office that covers your address, whether that's the city, Lea County or the City of Seminole, and if a permit is needed we apply for it and arrange the inspections.
Can I spray foam my own house in Hobbs without a contractor's license?
State licensing law lets you work on your own single-family home without a contractor's license, but only if it's the primary residence you own and live in. Anyone else who does or offers construction work needs a license from the state Regulation and Licensing Department, and specialty trade work you hire out has to go to a validly licensed contractor who applies for the permits and requests the inspections. We're licensed and insured, so if you'd rather hand the job off, that part is covered.
What is the best time of year to install spray foam insulation?
The best time is when the temperature and humidity on install day suit the product, because both play a critical role in how spray foam cures. Ask your contractor and the foam maker for clear guidance on timing in your area, and we'll go over the product's guidance with you when we set the date.
Other insulation work worth comparing
Attic insulation
When the old layer in your attic is thin or flattened, we can check the inches up there and bring the whole floor up to an even depth.
Blown-in insulation
Loose fill blown through a hose costs less than foam and fits open attic floors and some closed walls, so it's worth comparing before you decide.
Call about spray foam for your house
We take calls at (575) 318-2651 every day from 6 AM to 11 PM, and if you know the area you want foamed and its rough size in square feet, that's a good place to start.
Mon–Sun: 6 AM–11 PM